Bluetooth Backwashing Sediment Filter
SKU PW-FILT-BT-SED-BW-08
System features
5-micron media
A graded depth bed traps sand, silt, and rust down to a 5-micron rating for clearer water.
Automatic backwash
The valve reverses flow on a schedule to flush trapped debris to drain, with no cartridges to swap.
Bluetooth control
Set the backwash schedule and check status from your phone, then the valve runs on its own.
Whole-home pre-filter
Installed where water enters the home, it protects every fixture from grit.
Backed by warranty
A lifetime tank warranty and 10 years on the valve electronics stand behind the hardware.
Sized to your home
Three flow rates with matched tank sizes and media volumes fit your household demand.
Overview
About this system
A whole-home sediment filter that captures dirt, sand, silt, and rust before they reach your fixtures, then cleans itself on a schedule and reports to your phone over Bluetooth.
How it works
A self-cleaning bed that catches particles, not chemistry
Water passes down through a graded filter-media bed rated to 5 microns, where suspended grit is trapped and clear water carries on to the house. On a set schedule the Bluetooth control valve reverses the flow to backwash the bed, lifting captured debris to drain so the media stays open and effective. This is a physical sediment filter. It captures particles and is not designed to reduce chlorine, taste, or hardness.
Why homeowners choose it
Clear water at every tap, with almost nothing to do
Clear water everywhere
Grit and cloudiness are captured before the water reaches your kitchen, baths, and laundry.
Protects your plumbing
Catching sediment early helps keep appliances, valves, and downstream systems running cleaner.
Life with the sediment filter
The everyday difference clear water makes
When sediment is captured at the point of entry, the change shows up at every fixture and every load, day after day.
Clear at the kitchen tapNo grit or cloudiness in the glass you fill.
Cleaner water on tapSediment is caught before it reaches the fixture.
Every fixture and loadCleaner supply water for appliances and laundry.
Whole-home peace of mindProtection that starts where water enters the house.Specifications
Engineering specs
| Specification | Detail |
|---|---|
| Filtration | Graded sediment media, 5-micron rating |
| Captures | Dirt, sand, silt, rust, and suspended sediment |
| Control valve | Bluetooth electronic valve with scheduled automatic backwash |
| Flow Rate | 8 / 10 / 15 GPM (by variant) |
| Installation | Point-of-entry, whole-home. Installed by our local team. Requires a nearby drain for backwash. |
| Warranty | 10-year limited on tank & housing, parts only |
| Line connection size | to be confirmed |
| Flow Rate | Media Tank | Media Volume | Backwash Flow |
|---|---|---|---|
| 8 GPM | 10 x 54 | 1.5 cu ft | 7 GPM |
| 10 GPM | 12 x 52 | 2 cu ft | 10 GPM |
| 15 GPM | 13 x 54 | 2.5 cu ft | 12 GPM |
Installation & support
From setup to long-term care
What It Needs
A point-of-entry connection on the main line and a nearby drain for the backwash cycle. Our local team handles the installation.
Warranty
10-year limited warranty on the tank and housing, parts only. See the specs above for full terms.
Support That Answers
Reach a real person by phone, text, or chat when you have a question about setup or scheduling.
Low-Touch Ownership
Once the backwash schedule is set, the electronic control runs the cycle on its own, with long media life from the self-cleaning action.
Sizing
Which flow rate is right for you?
For a whole-house sediment filter, flow rate (GPM) is the peak service flow the media bed can treat while holding full pressure to every tap, catching the sand, silt, and rust before they reach your home. A larger tank treats more water at once and backwashes less often.
- 10 GPM. The typical single-family size, for 2 to 3 bathrooms and 2 to 4 people. Holds full pressure across normal household use.
- 15 GPM. For 3 to 4 bathrooms and 4 to 5 people, or homes with higher simultaneous demand and heavier sediment loads.
Not sure? A shower uses about 2.5 GPM and a washing machine 3 to 5 GPM, so add up the fixtures that might run together at your peak. When between sizes, size up for steadier pressure. Tell us your number of bathrooms and we will size it right.
Questions
Frequently asked questions
Is this difficult to install? I would like to try installing it myself.
For a homeowner with moderate plumbing experience, this is a practical do-it-yourself install. It ships with step-by-step instructions, and our technical support team is on hand to answer questions along the way.
What fittings are required for a 1 inch inlet and a 3/4 inch outlet?
The included fittings pack has a set of 1 inch NPT elbows and a set of 3/4 inch NPT straights. From those pipe threads, you adapt to your home's plumbing.
How long does the filter last, and how many gallons does it treat?
Media life depends on how much sediment is in your water. In typical conditions it treats from several hundred thousand to several million gallons before the media needs replacing.
Is the filter media replaceable?
Yes. You remove the control valve, empty the old media, and refill the tank with fresh media. Our support team can walk you through each step.
Complete your install
You may also need
Not sure this is the right system?
Not sure which system fits? A quick water test shows what is in your water, and we will match the right 360 setup to your home.
Shop Water TestsBluetooth Control & Monitoring From Your Phone
Your filter is built to run on its own. When you want to check in, open the app on your phone and connect to the system over Bluetooth for a clear view of how it is performing, how much water your home is using, and when the next backwash cycle is due. The settings you may actually want are right there, and nothing else asks for your attention.
Current Flow
2.4
GPM
Gallons Treated
2,629
Since reset
Used Today
142
Gallons
Peak Flow Today
6.1
GPM
Water Usage, Gallons Per Day
Your whole system, on one screen
Connect from anywhere in the house and see exactly how your filter is working. No installer visit, no control panel, no guesswork.
-
See it at a glance
Current water flow, gallons treated, and today's usage together in one view.
-
It cleans itself when it needs to
The app shows when the next backwash is due, and your filter runs the cycle automatically to keep the media clean.
-
Set up once, then relax
Your installer programs the system at setup. The app is there for the few things you may ever want to change.
What you can do from your phone
Monitor your filter
See current water flow, gallons treated, and system status in one clear dashboard.
Backwashes on its own
The app shows when a backwash is due, and your filter can run the cycle automatically to keep the media clean.
View water usage
Daily gallons, peak flow, and usage history show how your household actually uses water.
Start a cycle anytime
Run a backwash now or at the next scheduled time, for the occasions when you would rather not wait.
Adjust basic settings
Sync the time and choose when the system runs its cycle, so it happens while nobody is using water.
System history
Total gallons treated, cycle history, and performance records stay available whenever you want them.
How it works
01
Connect
Open the app while you are near the system and select it from the list.
02
Monitor
Check your dashboard for water flow, gallons treated, daily usage, and the next backwash.
03
Manage
Adjust a basic setting or start a backwash cycle on the rare occasion you need to.
Simple to use. Easy to monitor.
Your filter is designed to operate automatically. The app simply gives you a convenient way to view your system and reach the basic controls from your phone. There is nothing to watch day to day and nothing to adjust once your system is set up.
Advanced settings are configured at installation for your specific system and are best left at their recommended values.
Your installer or water professional can keep their service details in the app, so you always know who to contact if you need assistance.
App features require a Bluetooth enabled system and a phone within Bluetooth range of the filter. Backwash cycles are scheduled by the system based on its programmed settings. Screen shown is an illustration.