Bluetooth 360 Water Softener
SKU PW-SOFT-BT-RES-10
Specs at a glance
System features
Removes hardness
Ion-exchange resin exchanges out calcium and magnesium so water at every tap is genuinely soft.
10% cross-linked resin
Durable resin resists chlorine and iron for longer-lasting, consistent softening.
Bluetooth control valve
Runs regeneration and lets you check status and adjust settings from your phone.
Prevents scale
Soft water stops hardness scale in pipes, water heaters, and fixtures so appliances last.
High-capacity brine tank
Holds up to 220 pounds of salt for fewer refills than a cabinet-style unit.
Sized to your home
Choose 10, 15, or 20 GPM with matched tank and grain capacity.
Overview
About this system
The Bluetooth 360 Water Softener removes the calcium and magnesium that make water hard, so your home runs on soft water at every tap. Built in America.
How it works
Ion-exchange softening, managed by a Bluetooth control valve
Hard water passes through a bed of ion-exchange resin that captures calcium and magnesium and releases softness in their place. When the resin fills, the valve regenerates it with brine from the salt tank, then returns to service ready for the next demand. You check status and adjust settings from your phone, so the system stays tuned to your household without guesswork.
Life with the softener
What soft water changes, day to day
Soft water is an upgrade you feel everywhere, from the shower to the dishwasher to the laundry room. Here is what it looks like around the house.
Spot-free glasswareGlasses and dishes rinse clear, without hard-water spotting.
Before and afterThe difference between hard-water buildup and a soft-water home.
Comfort in the showerSofter feeling water and less film on glass and tile.
Whole-home soft waterEvery fixture and every load runs on treated water.Specifications
Engineering specs
| Specification | Detail |
|---|---|
| Resin | 10% cross-linked, chlorine and iron resistant |
| Internal porting | 1" |
| Connections | 1" standard; 1.25" available for larger plumbing or higher flow |
| Brine tank | Internal float and safety overflow; holds up to 220 lbs of salt |
| Included | Tank, Bluetooth valve, brine tank |
| Warranty | 10-year limited on tank & housing, parts only |
| Build | American-made |
| Flow Rate | Resin (Cu Ft) | Max Flow | Tank | Grain Capacity |
|---|---|---|---|---|
| 10 GPM | 1.0 | 10 GPM | 9×48 | 35,000 grains |
| 15 GPM | 1.5 | 15 GPM | 10×54 | 53,000 grains |
| 20 GPM | 2.0 | 20 GPM | 12×52 | 70,000 grains |
Installation & support
From water test to long-term care
What it needs
A 1" connection point at the main line, or 1.25" for larger plumbing, with a nearby drain and the brine tank set within reach for salt refills.
Installed by our team
Our local team handles the installation. Installation is quoted after your water analysis.
Support that answers
Reach a real person by phone, text, or chat when you have a question about setup, salt, or settings.
Low-touch ownership
Keep the brine tank topped with salt and let the Bluetooth valve handle regeneration. Check status from your phone anytime.
Sizing
Which flow rate is right for you?
Buy it with
Frequently bought together
Questions
Frequently asked questions
How do I know what size water softener I need?
Sizing comes down to two inputs: your water hardness and your average daily water usage. Together they set the grain capacity you need. Budget, space, plumbing size, peak flow rate, water source, and any other contaminants also factor in. Share your numbers and we will match you to the right flow rate.
Does soft water taste salty?
Almost never. The sodium added is proportional to the minerals removed, so on city water you are unlikely to notice any flavor. Very high-mineral well water can add a faint taste for sensitive palates. Pairing a reverse osmosis system with the softener removes that sodium at your drinking and cooking taps.
Is soft water bad for your water heater?
Soft water can wear a tank heater's sacrificial anode rod slightly faster, but modern corrosion-resistant rods largely offset this, and tankless heaters use no anode rod at all. The protection soft water gives your plumbing and appliances outweighs this minor consideration.
Does a water softener remove iron?
Only small amounts, and only under the right pH, hardness, and iron type, so a softener should not be relied on for iron. For iron, install a dedicated iron filter ahead of the softener, typically oxidation followed by a backwashing carbon-based filter.
Not sure this is the right system?
Not sure which system fits? A quick water test shows what is in your water, and we will match the right 360 setup to your home.
Shop Water TestsBluetooth Control & Monitoring From Your Phone
Your softener is built to run on its own. When you want to check in, open the app on your phone and connect to the system over Bluetooth for a clear view of how it is performing, how much water your home is using, and roughly how much salt is left in the tank. The settings you may actually want are right there, and nothing else asks for your attention.
Current Flow
2.4
GPM
Soft Water Left
399
Gallons
Used Today
142
Gallons
Peak Flow Today
6.1
GPM
Water Usage, Gallons Per Day
Your whole system, on one screen
Connect from anywhere in the house and see exactly how your softener is working. No installer visit, no control panel, no guesswork.
-
See it at a glance
Current water flow, soft water remaining, and today's usage together in one view.
-
Never wonder how much salt is left
Optional salt tracking keeps an approximate level for you and can alert you when it runs low.
-
Set up once, then relax
Your installer programs the system at setup. The app is there for the few things you may ever want to change.
What you can do from your phone
Monitor your softener
See current water flow, soft water remaining, and system status in one clear dashboard.
Track your salt
Optional salt tracking shows about how much is left in the brine tank, with a low salt alert when supported.
View water usage
Daily gallons, peak flow, and usage history show how your household actually uses water.
Easy regeneration control
Start a regeneration yourself, or let the system handle it automatically based on your water use.
Adjust basic settings
Sync the time, set your water hardness, and choose a regeneration time that suits your household.
System history
Total gallons treated, cycle history, and performance records stay available whenever you want them.
How it works
01
Connect
Open the app while you are near the system and select it from the list.
02
Monitor
Check your dashboard for water flow, remaining capacity, daily usage, and salt level.
03
Manage
Adjust a basic setting or start a regeneration on the rare occasion you need to.
Simple to use. Easy to monitor.
Your softener is designed to operate automatically. The app simply gives you a convenient way to view your system and reach the basic controls from your phone. There is nothing to watch day to day and nothing to adjust once your system is set up.
Advanced settings are configured at installation for your specific system and are best left at their recommended values.
Your installer or water professional can keep their service details in the app, so you always know who to contact if you need assistance.
App features require a Bluetooth enabled system and a phone within Bluetooth range of the softener. Salt level tracking is an optional convenience feature and does not affect how the softener operates. Screen shown is an illustration.